PM6007
Description
Integrated Current Feedback Amplifier with 2x 45W / 8 ohm rms
Gold Plated Inputs/Outputs incl. Phono (MM) input
Marantz proprietary HDAM-SA3 circuits
Selected high quality audio components
Advanced Thermal Compensation:
Tone control and Source Direct function
Integrated Headphone input
Related products
Pathos Inpol Heritage
Pathos Inpol Heritage – Integrated Amplifier without Compromises
InPol Heritage represents the projectual legacy of the late Pathos co-founder, designer and inventor of InPol, Engineer Giani Borinato.
The team of Pathos technical designers pushed themselves to the very highest level with this unprecedented project; an enormous amount of time was spent with this product, which is characterised by components of the highest quality and the customary absence of compromises.
The digital bias/gain set technology with intelligent control is entrusted to the same microprocessor which regulates the volume, thus guaranteeing the performance of the amplifier itself and its ability to drive the loudspeakers efficiently.
Thanks to the (optional) HiDac Mk2 converter, music lovers who want the very best from the latest digital sources will find their demands fully met.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Anodized Black
LINE MAGNETIC LM-212PA
LM-212PA -Mono Amplifier – Single Ended 212 – 1x32W
The LM-212PA is the «ultimate» monophonic amplifier from Line Magnetic, requiring more than two years of development. Its design is based on a Triode 212 mounted in Single Ended and «drived» by a 300B. In order to guarantee the durability of this exceptional tube, a sophisticated mechanical system protects it from shocks when not in use.
Finish: Silver
Hegel H20
The Hegel H20 incorporates the latest version of the Hegel FET-technology. A practical benefit of the H20 FET-technology is a more rhythmic sound. It is simply better at re-creating a bass line. Another vital element is the removal of harmonic echoes in the higher frequencies, which result in a lot more detail and still a smoother and more natural sound.
LINE MAGNETIC LM-MINI84IA
LM-MINI84IA – Headphone Amplifier – Single Ended EL84 – 2x3W
Overview:
The LM-mini84IA is a real integrated amplifier using a single-ended output stage using EL84 tubes in class A mode. The output power of 2x3W perfectly matches with all audiophile headphones. This powerful capability allows the LM-mini84IA to drive qualitative hi-fi speakers. AA selector located on the front panel allows the user to choose between headphone or speaker output modes.
Highlights
– Compact
– Point-to-point wiring
Finish: Black
LINE MAGNETIC LM-211IA
LM-211IA- Integrated Amplifier – Push Pull EL34 – 2x32W
The Line Magnetic integrated amplifier LM-211IA is a push-pull amplifier with 4x EL34 tubes in Class AB amplification and delivers 2x15W in triode mode and 2x32W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups.
The rear-illuminated front panel meter is used to adjust polarization of the tubes. The use of high-quality components (Realcap capacitors, ALPS potentiometer) wired in the air, for the most part, is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply. The LM-211IA delivers dynamic, rich and natural sound.
Pathos Logos
Pathos Logos: Integrated amplifier (HiDac Optional)
Close to the spirit that has animated since its origin has always been involved in the search for new solutions and improvement of its machines for Music.
E with this approach that Pathos after more than ten years after the introduction of the integrated Pathos Logos presents its evolution MKII.
Pathos is not usual to introduce updated versions of its models except in the presence of substantial and meaningful new ideas to offer its loyal customers and in general to all lovers of good music.
Indeed behind the usual original design the new Logos MKII hide the introduction of a series of new solutions some thought in order to further enhance the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele pretends that is also present in a high-end device.
Finish: Padouk Wood or Black Front Panel
Pathos Ampli D
Pathos Ampli D – Power Stereo Amplifier
AmpliD is the first of a new line of digital amplifiers from Pathos. Completely balanced in D Class, it features a 70 Watt output power on each channel at 8 Ohm, and 130 Watt on each channel at 4 Ohm; it has 2 kinds of inputs (1 as stereo balanced XLR and 1 as stereo unbalanced RCA line).
Despite small dimensions, AmpliD provides great power and high sound quality. It reached state-of-the-art among all those digital amplifiers, that cannot be underestimated in terms of technological innovation.
Finishes: Grey or Black with buttons
LINE MAGNETIC LM-201IA
LM-210IA – Integrated Amplifier – Single Ended 300B – 2x8W
The integrated amplifier LM-210IA is a Single Ended amplifier with 2x 300B tubes in Class A amplification and delivers 2x8W.
Output transformers are oversized. Listening, the magic of the 300B is total both in the richness of the timbres and the subtlety of the sound scene.
GLOBAL VIEW
Class A amplifier 2x8W RMS
Input stage: 2x 12AX7 Rectifier: 2x 5U4G Drivers: 2x 310A Power stage: 2x 300B