PM6006
Description
Integrated Current Feedback Amplifier with 2x 45W / 8 ohm rms
Further sound tuned with carefully selected components
Digital inputs (2x opt. / 1x coax.)
High quality DAC CS4398 and Marantz HDAM SA2
Fully shielded DAC unit; copper screws; rigid feet
Gold Plated Inputs/Outputs incl. Phono (MM) input
Marantz proprietary HDAM-SA3 circuits
Toroidal Transformer and high quality customized components
High quality Speaker Terminals (A / B switchable)
Related products
Pathos Ethos
Pathos Ethos: Integrated amplifier (HiDac Optional)
The edged exterior of the Éthos does not provide any clues about how to control the amplifier. Like with the Logos to operate the Éthos is a hit and miss trial and error affair. Both recessed buttons on the front panel are difficult to access and they carry no marks or descriptions. The remote controller (by the way very elegant slick piece of metal) will not help a lot as it also has just anonymous buttons. Either a user looks into the amp’s manual or just presses something to see what it does. This is a kind of trade-off for the clean Italian design,
Other than that the Éthos is built with great attention to detail, the selection of parts, craftsmanship and internal layout scream with quality and care. I loved the amp’s heatsinks that are cast in the shape of Pathos’ logo.
The central part is occupied by a turquoise alphanumeric display that is dimmable. The power switch can be found at the rear panel and there is no need to power the amp off as it stays in a standby mode at idle, A ‘progress bar’ on the display will inform you that the Éthos is waking up – it takes no more than 30 seconds before all circuits are stabilized.
Finishes: Matt metallic grey
Hegel HD30 (EISA Award Winner)
The Hegel HD30 is the ultimate digital control centre. It does everything you can dream of, and does so with world-class quality. There is an abundance of inputs, ranging from balanced AES/EBU and BNC connectors, to Network and USB connections – with the latter also accepting DSD signals. The built-in volume attenuator allows you to connect directly to a power amplifier or a pair of active loudspeakers. Highly advanced power supplies and careful lay-out brings the noise floor down towards a mindblowing – 150dB. In
Pathos Inpol Heritage
Pathos Inpol Heritage – Integrated Amplifier without Compromises
InPol Heritage represents the projectual legacy of the late Pathos co-founder, designer and inventor of InPol, Engineer Giani Borinato.
The team of Pathos technical designers pushed themselves to the very highest level with this unprecedented project; an enormous amount of time was spent with this product, which is characterised by components of the highest quality and the customary absence of compromises.
The digital bias/gain set technology with intelligent control is entrusted to the same microprocessor which regulates the volume, thus guaranteeing the performance of the amplifier itself and its ability to drive the loudspeakers efficiently.
Thanks to the (optional) HiDac Mk2 converter, music lovers who want the very best from the latest digital sources will find their demands fully met.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Anodized Black
Hegel H30
The massive H30 mono power amplifiers from Hegel play any loudspeaker in the world with ease and authority. The H30 is our best power amplifier ever, and is definitely a combatant for being the best power amplifier in the world. The H30 is developed as a mono block, but there is also the possibility to use it as a stereo power amplifier to start with if you are on a budget. Progress is a one way street and so for our power amplifiers. The H30 is using a new and improved version of the patented Hegel SoundEngine amplifier technology. This further reduce all types of distortion. In addition to the improve SoundEngine we are also using the highest possible level of the Hegel FET-technology in the input stage and the voltage gain stage.
LINE MAGNETIC LM-503PA
LM-503PA – Mono Amplifier – Single Ended 845 – 1x24W (Price for a pair)
The LM-503PA monoblocs have been created from an original design of Western Electric. It uses a single ended 845 output stage with Full Music 300B drivers. Pre-amplifier stage uses a special Line Magnetic tube, the 310A.
The rectifier tube is a 5U3C and the power line is filtered by two special chokes. User bias controls for 300B and 845 are used for bias adjustment with a specific VU meter to allow you to monitor bias with ease.
Pathos Cinema X
Pathos Cinema X – 5+1 Integrated Amplifier
There is a section of the audiophile community who is gradually turning towards home cinema and five-channel sound.
However, this move often includes several compromises on the stereo sound or requires even two different systems. With their new integrated amplifier, Pathos dares to prove that it is possible to integrate high-performance stereo and surround sound in one product.
Music lovers now have the possibility of watching movies using one only amplifier without sonic compromise.
Equally, those buying the Cinema-X just for listening to music will not be disappointed either!
LINE MAGNETIC LM-MINI84IA
LM-MINI84IA – Headphone Amplifier – Single Ended EL84 – 2x3W
Overview:
The LM-mini84IA is a real integrated amplifier using a single-ended output stage using EL84 tubes in class A mode. The output power of 2x3W perfectly matches with all audiophile headphones. This powerful capability allows the LM-mini84IA to drive qualitative hi-fi speakers. AA selector located on the front panel allows the user to choose between headphone or speaker output modes.
Highlights
– Compact
– Point-to-point wiring
Finish: Black
ATC SIA2-150
SIA2-150 – Stereo Integrated Amplifier
- 150 watts per channel.
- Class A/B operation.
- Hand built in the UK.
- 5 RCA inputs.
- Record, sub and pre outputs.
- Headphone jack.
- Remote control.
- 6 year warranty.