LINE MAGNETIC LM-512CA
LINE MAGNETIC LM-512CA
€9,500.00
LM-512CA – Preamplifier – With 6KZ8, 6922 & RCA 22DE4
The LM-512CA received in March 2017 a Red Dot Award, a German award recognized as the Oscar of International Industrial Design.
The integrated preamplifier LM-512CA operates with 3 pairs of tubes. A large volume potentiometer sits in the centre of the front panel allowing independent adjustment of each of the two channels.
It has a balanced XLR, 3 RCA inputs and also RCA and XLR outputs.
The Balance phase selection allows choosing the selection between American phase and British phase input Mode.
The use of high-quality components (Multicap, BC Axial, Philips, Panasonic Relay) wired in the air, for the most part, is the guarantee of exemplary reliability.
Its transformers output are of EI type, specially designed for power supply.
Finish: Silver
Description
Highlights
– Point-to-point wiring
– High-quality components
Tubes
2x 6KZ8 (Mullard)
2x 6922 (Genalex)
2x 22DE4 (American RCA)
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
SoftStart a and time-relay circuit (30 seconds)
High quality components: Multicap, BC Axial, Philips, Panasonic Relay
HOT selector
Specifications
THD: 0,5% (1KHz)
Signal/Noise ratio: 90dB
Frenquency response: 15 à 30 KHz (-3dB)
Frequency response RCA: 17 à 10 KHz (-3dB)
Sensitivity line input RCA: 150mV
Input Impedance: 600kΩ
Connectors
3x Line inputs RCA (pair)
1x Input XLR (pair)
1x Output RCA (pair)
1x Output XLR (pair)
Related products
LINE MAGNETIC LM-150IA
LM-150IA- Integrated Amplifier – Push Pull KT120 – 2x100W
Overview:
One hundred watts per channel, Class AB Integrated Stereo Amplifier with KT150 output power tubes, 12AX7, 12AU7 and 6SN7 input tubes. 12AX7, 12AU7 and 6SN7 are for three stages of signal amplification while KT150 for the power amplification.
Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier.
User bias control has been used for bias adjustment including 2 vu-meters.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc Audio grade of components have been applied.
LINE MAGNETIC LM-845IA
LM-845IA – Integrated Amplifier – Single Ended 845 – 2x22W
The LM-845 is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel, Single Ended design, Pure Class A Integrated Stereo Amplifier with 845 output power tubes. The drivers are 6P3P tubes, the capacitors are Multicap, American MIT Coupling Capacitors, German MCAP Coupling Capacitors,
All tube Integrated with 12AX7 input tubes for voltage amplification, EL34 driver tubes, 5AR4 rectifier tubes and 845 output tubes. Driver tubes 6P3P can also be replaced by different kinds of driver tubes and you can select which tubes you prefer judging by different sounds. Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-845IA as a power amplifier.
User bias control has been used for bias adjustment and one meter has been added to the front plate to allow you to monitor bias with ease. External Hum Balance adjustment for sound adjustment.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Pathos Classic One
Pathos Classic One – Integrated amplifier
After having won over the international audiophile community with state-of-the-art reference amplifiers, to conceive a product with a set price point as the main design limit has been a true challenge to Pathos.
The Classic One project was initiated to transfer, in a more affordable amplifier, all the know-how and expertise acquired developing reference products.
Classic One represents a new standard in its price category: it successfully blends in a single chassis a preamplifier and power amplifier, completely separated from each other and provided with their own individual power supplies.
The pre-stage – or, better, the preamplifier – is purely tube, balanced, pure Class A, extremely low noise, with high intrinsic linearity and without any feedback. It provides an exquisitely tube sound in terms of transparency, air, harmonics and refinement… in one word, musicality.
The power stage is a solid state power amplifier, high bias current, Class A/AB in order to adequately drive every load. It provides the sound with speed and dynamics, without influencing the tube nature of the sound. The volume control is motorised and remote controlled, the remote itself is in solid wood. Power supplies are over-dimensioned and stabilized.
Selected components, pure silver Pathos signal cable wiring, gold plated terminals, high-quality materials and refinement at its highest standard are additional benefits provided with the Classic One.
Together with such sound performance and overall quality, the Classic One is offered at a price that clearly demonstrates a philosophy of value for money. This is possible thanks to an aimed design approach, coupled with extremely accurate engineering and superior aesthetic form.
Pathos Adrenalin
Pathos Adrenalin
The Adrenalin amplifier represents the point of arrival of the INPOL (“Inseguitore a Pompa Lineare” – Linear Pump Tracker) concept.
The essence of such an apparatus is that of a tube amplifier featuring a very sensitive and refined timbre, combined with a surprising and amazing output capacity.
It really seems that Pathos designers and technicians achieved their goal: an iron fist concealed in a velvet glove.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Black and Grey, Matt Metallic
Pathos Inpol Heritage
Pathos Inpol Heritage – Integrated Amplifier without Compromises
InPol Heritage represents the projectual legacy of the late Pathos co-founder, designer and inventor of InPol, Engineer Giani Borinato.
The team of Pathos technical designers pushed themselves to the very highest level with this unprecedented project; an enormous amount of time was spent with this product, which is characterised by components of the highest quality and the customary absence of compromises.
The digital bias/gain set technology with intelligent control is entrusted to the same microprocessor which regulates the volume, thus guaranteeing the performance of the amplifier itself and its ability to drive the loudspeakers efficiently.
Thanks to the (optional) HiDac Mk2 converter, music lovers who want the very best from the latest digital sources will find their demands fully met.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Anodized Black
Pathos Inpol 2
Pathos Inpol 2 – Integrated Amplifier
Is the latest creation from Pathos, so-called because in the design Pathos presents the 2nd generation of their proprietary INPOL® technology.
It is also a completely balanced dual-mono configuration – easily recognized by the styling.
INPOL®, which carries a worldwide patent and gave birth to the multi-award winning products TT and InPower, has undergone advanced evolution.
The INPOL2 is a unique amplifier in many aspects and its sound quality will simply astound.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Padouk Wood or Black Front Panel
LINE MAGNETIC LM-201IA
LM-210IA – Integrated Amplifier – Single Ended 300B – 2x8W
The integrated amplifier LM-210IA is a Single Ended amplifier with 2x 300B tubes in Class A amplification and delivers 2x8W.
Output transformers are oversized. Listening, the magic of the 300B is total both in the richness of the timbres and the subtlety of the sound scene.
GLOBAL VIEW
Class A amplifier 2x8W RMS
Input stage: 2x 12AX7 Rectifier: 2x 5U4G Drivers: 2x 310A Power stage: 2x 300B
LINE MAGNETIC LM-88IA
LM-88IA – Integrated Amplifier – Push Pull KT88 – 2x42W
Forty-two watts per channel, Class AB Integrated Stereo Amplifier with KT88 output power tubes, 6CL8A and 12BH7 input tubes. Tubes we selected for the amplifier is Electro Harmonix 12BH7, Mullard 6CL8A and JJ Electronics KT88.
Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
LM-88IA Amplifier can operate in two different ways Auto-biased or Fixed Bias. You can select the one you prefer. Power output for Auto-bias mode is 45 watts while for fixed bias it is 30 watts per channel. Once worked in Auto-bias mode it outputs a more warmth sound and go near to the way of Class A operation.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-88IA as a power amplifier.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Audio Grade of components for LM-88IA: Japanese ALPS volume potentiometer, Multicap coupling Capacitors, American MIT Coupling Capacitors, German MCAP Coupling Capacitors, etc.
Finish: Black