LINN Uphorik Phono Stage
LINN Uphorik Phono Stage
€2,690.00
Uphorik features separate dedicated inputs and circuits for moving magnet (MM) and moving coil (MC) cartridges, and has a full range of adjustment that allows you to easily optimise its settings to any cartridge.
Description
Technical Details:Supported Cartridges: MC / MM;
Input Connectors: MM – MM – 1 x L/R pair RCA and 1 x L/R pair XLR; MC – 1 x L/R pair RCA and 1 x L/R pair XLR;
Input Impedance: 10 Ω (MC) / 47 kΩ (MM)
Gain: MM – +44 dB / +48 dB @ 1 kHz; MC – +54 dB / +64 dB @ 1 kHz
Adjustable impedance: MM – 51 kΩ, 49 kΩ , 47 kΩ, 45 kΩ; MC (low): 31 Ω, 37 Ω, 42 Ω, 53 Ω, 70 Ω, 100 Ω, 170 Ω; MC (high): 580 Ω, 670 Ω, 810 Ω, 1 kΩ
Adjustable capacitance: MM – 68 pF, 105 pF, 135 pF, 175 pF, 215 pF, 255 pF, 285 pF, 325 pF; MC – 470 pF, 1 nF, 1.5 nF, 2 nF
Line Outputs: RCA pair ( max.6 V RMS, 8.5 V Peak, +15.6 dBv; 300 Ω); XLR pair (max. 12 V RMS, 17 V Peak, +21.6 dBv; 600 Ω)
THD+N: >0.015 % MM -44 dBv; >0.015 % MC -64 dBv
Signal to Noise Ratio: >105 dB
RIAA Tracking: +/- 0.2 dB (20 – 20 kHz)
Frequency Response: 2.5 Hz to 40 kHz (-3 dB)
Mains Input voltage (auto-sensing): 100 – 120 V; 220 – 240 V
Product Dimensions H x W x D: 91 x 380 x 380 mm
Product Weight: 4.4. kg
Related products
Pathos Inpower
Pathos Inpower – Monoblock Power Amplifier
InPower monoblock power amplifiers represent the evolution of the INPOL® circuit, originally created with the birth of the T.T. integrated amplifier.
The purpose of InPower project was to design an amplifier able to drive all loudspeakers.
Even in spacious listening environments. All this with the same state-of-the-art sound quality which has been universally bestowed upon the T.T.
LINE MAGNETIC LM-845 Premium
LM-845 Premium – Integrated Amplifier – Single Ended 845 – 2x30W
The LM-845 Premium is the result of many years of research on the 845 triodes Single Ended design. Thanks to its exceptional design and manufacturing quality, it is fast becoming the absolute reference in the high-end amplifiers world. With a power output of 2x30W, it can be used with most of the existing reference speakers.
The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is Outputs unit. In the amplifier unit the main amplifier and power supply parts are included while in the outputs unit output transformer and speaker outputs parts are included.
Amplifier unit and outputs unit are connected with two separate well-built connectors and cables for which you can put up and down or left and right.
All tube Integrated with 12AX7 input tubes, 310A signal amplification stage, 300B driver tubes and 845 output tubes. Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Line Magnetic 310A, Shuguang 300B and Shuguang 845.
Two user bias controls for 300B and 845 have been used for bias adjustment and two meters has been added to the front plate to allow you to monitor bias with ease.
Negative Feedback switch is on the front plate that you can choose between two levels of NFB to enjoy the different sound outputs.
In LM-845 Premium it includes eight transformers. Two pieces of power transformers, two output transformers, two coupling driver transformers, two chokes. In order to have a stable and better power supply, we have designed two pieces of specially designed Toroid power transformers in Balance. EI type of output transformers is installed in the outputs unit separately to lower interfere from the external radio frequency.
Pathos Ethos
Pathos Ethos: Integrated amplifier (HiDac Optional)
The edged exterior of the Éthos does not provide any clues about how to control the amplifier. Like with the Logos to operate the Éthos is a hit and miss trial and error affair. Both recessed buttons on the front panel are difficult to access and they carry no marks or descriptions. The remote controller (by the way very elegant slick piece of metal) will not help a lot as it also has just anonymous buttons. Either a user looks into the amp’s manual or just presses something to see what it does. This is a kind of trade-off for the clean Italian design,
Other than that the Éthos is built with great attention to detail, the selection of parts, craftsmanship and internal layout scream with quality and care. I loved the amp’s heatsinks that are cast in the shape of Pathos’ logo.
The central part is occupied by a turquoise alphanumeric display that is dimmable. The power switch can be found at the rear panel and there is no need to power the amp off as it stays in a standby mode at idle, A ‘progress bar’ on the display will inform you that the Éthos is waking up – it takes no more than 30 seconds before all circuits are stabilized.
Finishes: Matt metallic grey
Hegel H20
The Hegel H20 incorporates the latest version of the Hegel FET-technology. A practical benefit of the H20 FET-technology is a more rhythmic sound. It is simply better at re-creating a bass line. Another vital element is the removal of harmonic echoes in the higher frequencies, which result in a lot more detail and still a smoother and more natural sound.
LINE MAGNETIC LM-212PA
LM-212PA -Mono Amplifier – Single Ended 212 – 1x32W
The LM-212PA is the «ultimate» monophonic amplifier from Line Magnetic, requiring more than two years of development. Its design is based on a Triode 212 mounted in Single Ended and «drived» by a 300B. In order to guarantee the durability of this exceptional tube, a sophisticated mechanical system protects it from shocks when not in use.
Finish: Silver
Pathos Logos
Pathos Logos: Integrated amplifier (HiDac Optional)
Close to the spirit that has animated since its origin has always been involved in the search for new solutions and improvement of its machines for Music.
E with this approach that Pathos after more than ten years after the introduction of the integrated Pathos Logos presents its evolution MKII.
Pathos is not usual to introduce updated versions of its models except in the presence of substantial and meaningful new ideas to offer its loyal customers and in general to all lovers of good music.
Indeed behind the usual original design the new Logos MKII hide the introduction of a series of new solutions some thought in order to further enhance the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele pretends that is also present in a high-end device.
Finish: Padouk Wood or Black Front Panel
Pathos Cinema X
Pathos Cinema X – 5+1 Integrated Amplifier
There is a section of the audiophile community who is gradually turning towards home cinema and five-channel sound.
However, this move often includes several compromises on the stereo sound or requires even two different systems. With their new integrated amplifier, Pathos dares to prove that it is possible to integrate high-performance stereo and surround sound in one product.
Music lovers now have the possibility of watching movies using one only amplifier without sonic compromise.
Equally, those buying the Cinema-X just for listening to music will not be disappointed either!
LINE MAGNETIC LM-150IA
LM-150IA- Integrated Amplifier – Push Pull KT120 – 2x100W
Overview:
One hundred watts per channel, Class AB Integrated Stereo Amplifier with KT150 output power tubes, 12AX7, 12AU7 and 6SN7 input tubes. 12AX7, 12AU7 and 6SN7 are for three stages of signal amplification while KT150 for the power amplification.
Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier.
User bias control has been used for bias adjustment including 2 vu-meters.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc Audio grade of components have been applied.