LINN Kandid
LINN Kandid
€3,980.00
The first thing you’ll notice about Kandid is that the motor housing is exposed. With no cartridge housing potential sources of resonance are removed, resulting in purer, cleaner sound, making all your vinyl sound better than ever.
Description
Technical Specification
Cartridge type: | Low output moving coil |
Stylus and cantilever: | Slot mounted, 3um x 70um nude line contact diamond in boron cantilever |
Vertical tracking angle: | 20 degrees |
Tracking force: | 1.72g – 1.77g (1.75g preferred) |
Pin connection type: | Flying wire with termination clips |
Recommended load: | 70Ω ~ 1kΩ (determine optimum by listening) |
Separation at 1kHz: | Better than 35 dB |
Channel balance at 1 kHz: | +/- 0.5 dB |
Output at 1 kHz @3.45 cm/s: | 0.4 mv |
Weight: | 5.7 g (without stylus cover) |
Related products
LINN Urika internal phono stage
This unique moving coil phono stage fits snugly inside the Sondek LP12 turntable and works with the Linn Radikal motor control to deliver a new benchmark in LP12 performance.
LINN K10 Speaker Cable (m)
Our entry level speaker cable is compact and discreet, while offering reliable signal transmission to your speakers.
Custom Design Milan Reference 10 Hi-Fi 2
The Milan Reference 10 Hi-Fi 4 Support Furniture Range have been introduced by Custom Design as a result of our customers requests.
OCTAVE Black Box
OCTAVE Black Box OCTAVE, with the Black Box technology, offers an instrument to optimizing the OCTAVE amplifier in respect to the speaker. This flexibility is a unique feature of the OCTAVE brand. The dynamic and tonal stability of an amplifier is strongly dependent upon the stability and capacity of the power supply, therefore the Black Box and Super Black Box were developed as external upgrades to the OCTAVE amplifiers’ power supply storage capacitors by increasing their capacitance by a factor of 4 (Black Box) or 10 (Super Black Box), respectively. This is a tremendous benefit if the speaker is difficult to drive. Loudspeaker efficiency is made less critical, while the amplifier is enabled to handle speakers with minimum impedances as low as 2 Ohms.
Custom Design Discrete Hi-Fi 2
The Discrete Inert HiFi Support Range are unique to Custom Design, manufactured from exclusive, hand made and hand finished 5mm Acoustic Aluminium shelves Part of our philosophy to question and challenge all ideas. The Acoustic Aluminium and Acoustic Steel are the pioneering, engineering approach that Custom Design has taken to absorbing unwanted resonance, maximising isolation through resonance noise vibration absorption and sound performance, a serious improvement to the usual option of hifi support stand design.
The system works on the principle of constrained layer dampening, which is two sheets of the same material, found to be the most efficient, bonded together with the patented polymer.
Standard Finishes: Chrome / Brushed Chrome / Gold / Black
H x W x D 410mm x 525mm x 400mm
Shelf spacing 175mm – Other spacings available 100mm, 125mm, 200mm, 225mm or 250mm on request.
Support finishes available: Black, Mercury, Chrome, Brushed Chrome or Gold finish.
LINN Silver RCA Interconnects 1.2m
Linn Silver interconnect cable shares the same low capacitance, low loss dielectric of the Black interconnect cable but has much more extensive shielding.
Custom Design Milan 6 HiFi 4
The Milan 6 HiFi Furniture Support Range are manufactured from only FSC sourced solid hardwoods including real Oak, real Walnut and real Ash. Each piece of real, solid hardwood we supply has been hand selected and colour tone matched to the best of our ability, please visit our colour swatch page to view the finishes available. All of our real, solid hardwoods are sourced from only FSC fully licenced, professionally managed forests and thanks to techniques of sustained yield forest management more hardwoods have been grown in the last 30 years than have been harvested.
Standard Dimensions – 585mm (H) x 570mm (W) x 400mm (D)