F10 Neo
Description
Cube Audio F10 Neo is a new 10″ fullrange driver. With ultra-powerful neodymium magnet motor and new cone geometry new Cube Audio 10 inch flagship drivers are now available.
Thiele / Small parameters
Fs = 30 Hz
Re = 5.5 ohms
Le = 0.006 mH
Qt = 0.43
Qes = 0.44
Qms = 17.8
Cms = 0.76 mm/N
Vas = 127 liters
Sd= 346 cm^2
Bl = 9.7 Tm
Xmax = +- 3 mm*
Xdamage = +- 6 mm
Sensitivity = 92 dB
Impedance = 6 Ohms
Related products
ATC SCM19A
SCM19A
Overview
- New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy waveguide.
- “SL” spec bass driver with 75mm integral Soft Dome.
- 9kg optimised short-coil/long gap motor assembly.
- On-board grounded source 182 watts Class A/B Bi-amplifier.
- Active crossover filters and overload protection.
- 6-year warranty.
FINISHES: CHERRY / BLACK ASH / SATIN BLACK & WHITE
LINE MAGNETIC LM-69
Speakers (Pair) – Full range 6 x 9inch – 2x20W – 8Ω – 95dB/W/1m – 40Hz-22kHz
The LM-69 (6 inch x 9 inch) loudspeakers use a loudspeaker developed by Line Magnetic but inspired by the creations of the 50s and 60s. Its double membrane (bi-conical) is made of cellulose pulp and has rigidity and lightness qualities that allow it to achieve an exceptional performance of 95dB into 8 Ohms.
Finish: Cherry
Raidho C-2.2 Black
Raidho C-2.2 Black
The Raidho Acoustics C-2.2 is a 2.5-way floor standing loudspeaker. It is built with the same unique qualities as the C-1.2, but with a somewhat larger cabinet and an additional Raidho Ceramix Driver.
The Raidho Acoustics C-2.2 is a 2.5-way floor standing loudspeaker. It is built with the same unique qualities as the C-1.1, but with a somewhat larger cabinet and an additional Raidho Ceramix Driver. This relieves the workload on the upper Ceramix Driver, which results in a deeper bass and an even higher dynamic headroom. The extended bass frequency and the larger dynamic contrasts give the music performance more substance and a very natural tone colour.
Finishes: Black €22500, Walnut Burl or Personalised Colour €27000
ATC SCM150
SCM150
Overview: Active or Passive
The SCM150 ASL (active) and SCM150 SL (passive) are designed to perform at their best with the finest quality hi-fi equipment.
Like their smaller brother, the SCM50 ASL & 100 the monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150s soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance parameters.
Bass performance is equally impressive, thanks to ATC’s 15″ professional level bass driver that incorporates the company’s unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers.
ATC’s active crossover network consists of a wide bandwidth, electronically balanced input stage with high common mode rejection and very low distortion.
In passive form, the SCM150 SL provides a broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the audio frequency range.
SCM150ASLT (ACTIVE) | STANDARD | €22,285 |
PREMIUM | €25,175 | |
ADD HIGH GLOSS TO VENEER | €4,889 | |
PIANO BLACK & WHITE | €27,693 | |
ANNIVERSARY | €35,975 |
SCM150PSLT (PASSIVE) | STANDARD | €18,700 |
PREMIUM | €21,600 | |
ADD HIGH GLOSS TO VENEER | €4,889 | |
PIANO BLACK & WHITE | €23,750 | |
ANNIVERSARY | €31,780 |
ATC SCM-11
SCM11
Overview
• New ATC designed and built 25mm soft dome HF unit with precision alloy waveguide.
• Precision undercut bass pole.
• “CLD” driver technology with 45mm integral soft dome.
• In-house, hand-wound precision flat wire coil.
• Massive optimised motor assembly.
• Flat impedance curve allowing easy load for amplifiers.
• 6-year warranty.
FINISHES: CHERRY / BLACK ASH / SATIN BLACK & WHITE
ATC SCM40
SCM40
Overview
- New ATC designed and built 25mm soft dome HF unit with precision alloy waveguide..
- ATC 164mm bass driver.
- Massive optimised motor assembly.
- ATC Soft Dome mid-range driver.
- Flat impedance curve allowing easy load for amplifiers.
- 6-year warranty.
FINISHES: CHERRY / BLACK ASH / SATIN BLACK & WHITE
ATC SCM-19
SCM19
Overview
• New ATC designed and built 25mm soft dome HF unit with precision alloy waveguide.
• “SL” spec bass driver with 75mm integral soft dome.
• 9kg optimised short-coil/long gap motor assembly.
• In-house, hand-wound precision flat wire coil.
• Flat impedance curve allowing easy load for amplifiers.
• 6-year warranty.
ATC SCM-20PSL
SCM20 – Can be active or passive
Overview
The hybrid design incorporates a 150mm bass cone on to which is grafted a 75mm soft dome.
The magnet assembly utilises ATC’s unique “SL” technology which greatly reduces distortion in moving coil drive units by a very significant 12-15dB (3rd harmonic). To minimise Time Domain Distortion both dome and cone are made from acoustically “dead” polyester wave material doped with ATC’s own formulation.
Not only does the SCM20SL reproduce bass with remarkable articulation and authority, it also has outstanding mid-band clarity, incredible dynamic range, and awesome power handling.
The active tower version (SCM20ATSL) is powered by the ATC “Grounded Source” Bi-amplifier. The bass/mid is driven with 200 watts, while the tweeter has 50 watts of class “AB” power.
Both amplifiers feature momentary gain reduction circuitry which both protects drive units and prevents unpleasant sounds from overdrive.
Accompanied by either ATC SCA2 or CA2 preamp the SCM20AT will outperform any other combination in its price range and many costing far more.
An all-time classic still available and in any veneer to special order.