ATC SCM40
ATC SCM40
€4,420.00
SCM40
Overview
- New ATC designed and built 25mm soft dome HF unit with precision alloy waveguide..
- ATC 164mm bass driver.
- Massive optimised motor assembly.
- ATC Soft Dome mid-range driver.
- Flat impedance curve allowing easy load for amplifiers.
- 6-year warranty.
FINISHES: CHERRY / BLACK ASH / SATIN BLACK & WHITE
Description
Drivers: HF ATC 25mm Neodymium, Mid 75mm ATC Soft Dome, LF ATC 164mm SC
Matched Response: ±0.5dB
Frequency Response (-6dB): 48Hz-22kHz
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Sensitivity: 85dB @ 1W @ 1metre
Max SPL: 112dB
Recommended Power Amplifier: 75 to 300 Watts
Nominal Impedance: 8 Ohm
Crossover Frequencies: 380Hz & 3.5kHz
Connectors: Binding Posts/4mm Plugs, tri-wire
Dimensions (HxWxD): 980 x 370 x 305mm (inc. foot plinth, spikes add 25mm to height, grill adds 34mm to depth)
Weight: 31kg
“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.” Hi-Fi Choice, October 2014
Related products
ATC SCM40-A
SCM40A
Overview
- New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
- ATC Soft Dome mid-range driver.
- ATC 164mm short coil bass driver.
- All drive units incorporate massive optimised motor assemblies.
- On-board grounded source 242 watt Class A/B Tri-amplifier.
- Active crossover filters and overload protection.
- 6-year warranty.
FINISHES: CHERRY / BLACK ASH / SATIN BLACK & WHITE
ATC SCM-7
SCM7
Overview
• New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
• 125mm ATC mian d/bass unit with integral soft dome.
• In-house, hand-wound precision flat wire coil.
• Massive optimised motor assembly.
• Flat impedance curve allowing easy load for amplifiers.
• 6-year warranty.
FINISHES: CHERRY / BLACK ASH / SATIN BLACK & WHITE
Line Magnetic 222
Inspired by the famous JENSEN222 coaxial speaker, this monitor delivers unparalleled musicality and an extremely faithful stereo image. The use of the coaxial (with a 6-cell horn) greatly facilitates the positioning of the speakers in the listening room, knowing that the listening distance can be relatively low (about 2m50).
LINE MAGNETIC LM-222
Speakers (Pair) – Coaxial 10inch woofer & 1 inch horn tweeter 2x30W – 8Ω – 102dB/W/1m – 37Hz-20kHz
Inspired by the famous JENSEN222 coaxial speaker, this monitor delivers unparalleled musicality and an extremely faithful stereo image. The use of the coaxial (with a 6-cell horn) greatly facilitates the positioning of the speakers in the listening room, knowing that the listening distance can be relatively low (about 2m50).
ATC SCM-20PSL
SCM20 – Can be active or passive
Overview
The hybrid design incorporates a 150mm bass cone on to which is grafted a 75mm soft dome.
The magnet assembly utilises ATC’s unique “SL” technology which greatly reduces distortion in moving coil drive units by a very significant 12-15dB (3rd harmonic). To minimise Time Domain Distortion both dome and cone are made from acoustically “dead” polyester wave material doped with ATC’s own formulation.
Not only does the SCM20SL reproduce bass with remarkable articulation and authority, it also has outstanding mid-band clarity, incredible dynamic range, and awesome power handling.
The active tower version (SCM20ATSL) is powered by the ATC “Grounded Source” Bi-amplifier. The bass/mid is driven with 200 watts, while the tweeter has 50 watts of class “AB” power.
Both amplifiers feature momentary gain reduction circuitry which both protects drive units and prevents unpleasant sounds from overdrive.
Accompanied by either ATC SCA2 or CA2 preamp the SCM20AT will outperform any other combination in its price range and many costing far more.
An all-time classic still available and in any veneer to special order.
ATC SCM-100SE
SCM100SE
Overview: Active or Passive
- New ATC designed and built 25mm Soft Dome tweeter model SH25-76S.
- The Unique ATC 75mm Soft Dome midrange model SM75-150S.
- The latest 314mm short coil super linear magnet Bass Driver model SB75-314SL.
- Fully discrete amplifier for each drive unit combined to create a Tri-amplifier of 350 watts with active crossover filters, phase correction and overload protection.
- Accurate timbre, wide dispersion and perfect imaging.
- Any veneer to order.
- Choice of top brow finish and colour detail.
- 6-year warranty.
SCM100ASL SE TOWER (ACTIVE) | €31,250 |
ADD HIGH GLOSS | €4,833 |
SCM100PSL SE TOWER (PASSIVE) | €27,700 |
ADD HIGH GLOSS | €4,833 |
ALL STANDARD, PREMIUM AND PIANO BLACK FINISHES AVAILABLE ALTERNATIVE VENEERS & FINISHES
ATC SCM50PSL
SCM50
Overview: Active or Passive
The SCM50 ASL (active) and SCM50 SL (passive) are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment.
The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lie mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters.
Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. Our active crossover network consists of a wide bandwidth, electronically balanced input stage with high common mode rejection and very low distortion.
Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides a broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range.
SCM50ASL (ACTIVE) | STANDARD FINISH | €13,075 |
PREMIUM | €13,600 | |
ADD HIGH GLOSS TO VENEER | €2,444 | |
PIANO BLACK & WHITE | €14,960 |
SCM50PSL (PASSIVE) | STANDARD FINISH | €9,820 |
PREMIUM | €10,350 | |
ADD HIGH GLOSS TO VENEER | €2,444 | |
PIANO BLACK & WHITE | €11,385 |
FINISHES: CHERRY / BLACK ASH / OAK / WALNUT / SATIN BLACK & WHITE PREMIUM: ROSEWOOD / BURR MAGNOLIA / BURR POPLAR / PIPPY OAK / YEW
ATC HTS40 PER UNIT
HTS40 On Wall Speaker
Overview
This large 3-way design features ATC’s 75mm soft dome for exceptional mid-range clarity and is suitable for main loudspeakers in larger rooms. The HTS40 may also be used as surround loudspeakers. The cabinet can be configured for either portrait or landscape orientations and is available in either white or black satin finishes. The clean, simple visual design can be seamlessly integrated into a wide range of interiors and décors.
Features
- No compromise driver technology borrowed from ATC’s high-end studio monitoring products.
- High-dynamic range for accurate reproduction of musical transients and high-impact film soundtracks.
- Neutral voicing and very low distortion deliver audiophile performance from an install package.
- Hidden wall mounting brackets and input terminals.
- Proprietary long-throw bass driver produces exceptional low-frequency output and linearity.
- 6-year warranty.
Handmade in England.