ARCAM HDA SA20
ARCAM HDA SA20
€1,250.00
SA20
There are two frequent problems with hi-fi amplifiers. Class A, the traditional audiophile’s choice, uses a single power supply constantly running at full capacity, even when there’s no signal coming through. Great for reproducing those subtle details at low levels however struggles to provide extreme power when needed.
Class A/B, the most common amp class, switches between the two internal amplifiers, one for each half of the waveform. Far more efficient but often a recipe for crossover distortion, since those low-level details we crave can get lost within any mis-match between the two switching over.
Class G is essentially a hybrid amplifier, utilising Class A specifically for low-level signals, but when required switching in an additional power supply to power those larger sections of the waveform.
Description
The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment.
- Class G amplification for impeccable sound and efficiency
- 80W of power per channel
- 5 analogue inputs including phono
- 3 digital inputs
- 32-bit DAC,Sabre ESS9038K2M
- Full I/P control
- Total harmonic distortion + noise = 0.003%
Related products
Pathos Ethos
Pathos Ethos: Integrated amplifier (HiDac Optional)
The edged exterior of the Éthos does not provide any clues about how to control the amplifier. Like with the Logos to operate the Éthos is a hit and miss trial and error affair. Both recessed buttons on the front panel are difficult to access and they carry no marks or descriptions. The remote controller (by the way very elegant slick piece of metal) will not help a lot as it also has just anonymous buttons. Either a user looks into the amp’s manual or just presses something to see what it does. This is a kind of trade-off for the clean Italian design,
Other than that the Éthos is built with great attention to detail, the selection of parts, craftsmanship and internal layout scream with quality and care. I loved the amp’s heatsinks that are cast in the shape of Pathos’ logo.
The central part is occupied by a turquoise alphanumeric display that is dimmable. The power switch can be found at the rear panel and there is no need to power the amp off as it stays in a standby mode at idle, A ‘progress bar’ on the display will inform you that the Éthos is waking up – it takes no more than 30 seconds before all circuits are stabilized.
Finishes: Matt metallic grey
LINE MAGNETIC LM-150IA
LM-150IA- Integrated Amplifier – Push Pull KT120 – 2x100W
Overview:
One hundred watts per channel, Class AB Integrated Stereo Amplifier with KT150 output power tubes, 12AX7, 12AU7 and 6SN7 input tubes. 12AX7, 12AU7 and 6SN7 are for three stages of signal amplification while KT150 for the power amplification.
Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier.
User bias control has been used for bias adjustment including 2 vu-meters.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc Audio grade of components have been applied.
Hegel HD30 (EISA Award Winner)
The Hegel HD30 is the ultimate digital control centre. It does everything you can dream of, and does so with world-class quality. There is an abundance of inputs, ranging from balanced AES/EBU and BNC connectors, to Network and USB connections – with the latter also accepting DSD signals. The built-in volume attenuator allows you to connect directly to a power amplifier or a pair of active loudspeakers. Highly advanced power supplies and careful lay-out brings the noise floor down towards a mindblowing – 150dB. In
Pathos Inpol Heritage
Pathos Inpol Heritage – Integrated Amplifier without Compromises
InPol Heritage represents the projectual legacy of the late Pathos co-founder, designer and inventor of InPol, Engineer Giani Borinato.
The team of Pathos technical designers pushed themselves to the very highest level with this unprecedented project; an enormous amount of time was spent with this product, which is characterised by components of the highest quality and the customary absence of compromises.
The digital bias/gain set technology with intelligent control is entrusted to the same microprocessor which regulates the volume, thus guaranteeing the performance of the amplifier itself and its ability to drive the loudspeakers efficiently.
Thanks to the (optional) HiDac Mk2 converter, music lovers who want the very best from the latest digital sources will find their demands fully met.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Anodized Black
LINE MAGNETIC LM-216IA
LM-216IA – Integrated Amplifier – Push Pull KT88 – 2x38W
The Line Magnetic integrated amplifier LM-216IA is a push-pull amplifier with 4x KT88 tubes in Class AB amplification and delivers 2x22W in triode mode and 2x38W in ultra-linear mode. The LM-216iA delivers dynamic, rich, and natural sound.
GLOBAL VIEW
Class AB amplifier
2x22W RMS Triode mode
2x38W RMS Ultra-linear mode Input stage: 2x 12AX7 and 2x 12BH7 Power stage: 4x KT88
LINE MAGNETIC LM-88IA
LM-88IA – Integrated Amplifier – Push Pull KT88 – 2x42W
Forty-two watts per channel, Class AB Integrated Stereo Amplifier with KT88 output power tubes, 6CL8A and 12BH7 input tubes. Tubes we selected for the amplifier is Electro Harmonix 12BH7, Mullard 6CL8A and JJ Electronics KT88.
Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
LM-88IA Amplifier can operate in two different ways Auto-biased or Fixed Bias. You can select the one you prefer. Power output for Auto-bias mode is 45 watts while for fixed bias it is 30 watts per channel. Once worked in Auto-bias mode it outputs a more warmth sound and go near to the way of Class A operation.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-88IA as a power amplifier.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Audio Grade of components for LM-88IA: Japanese ALPS volume potentiometer, Multicap coupling Capacitors, American MIT Coupling Capacitors, German MCAP Coupling Capacitors, etc.
Finish: Black
LINE MAGNETIC LM-201IA
LM-210IA – Integrated Amplifier – Single Ended 300B – 2x8W
The integrated amplifier LM-210IA is a Single Ended amplifier with 2x 300B tubes in Class A amplification and delivers 2x8W.
Output transformers are oversized. Listening, the magic of the 300B is total both in the richness of the timbres and the subtlety of the sound scene.
GLOBAL VIEW
Class A amplifier 2x8W RMS
Input stage: 2x 12AX7 Rectifier: 2x 5U4G Drivers: 2x 310A Power stage: 2x 300B
Hegel H30
The massive H30 mono power amplifiers from Hegel play any loudspeaker in the world with ease and authority. The H30 is our best power amplifier ever, and is definitely a combatant for being the best power amplifier in the world. The H30 is developed as a mono block, but there is also the possibility to use it as a stereo power amplifier to start with if you are on a budget. Progress is a one way street and so for our power amplifiers. The H30 is using a new and improved version of the patented Hegel SoundEngine amplifier technology. This further reduce all types of distortion. In addition to the improve SoundEngine we are also using the highest possible level of the Hegel FET-technology in the input stage and the voltage gain stage.