Alto Extremo Lyd II (Set of four )
Alto Extremo Lyd II (Set of four )
€635.00
The best Non Magnetic absorber ever known. Optic, haptic and function are precised. This is one absorber that does justice to its name. It works optimally under devices and speakers . Even with more difficult floor surfaces, such as older floors or glass racks, the Lyd II is the best choice.
The Lyd absorbers are our favorite for a variety of applications. Among loudspeakers they help to achieve a more homogeneous and clear spatial sound. The effect is comprehensible, immediately. Used under hifi devices the image becomes more stable.
Because of the combination of different materials and damping rings, high resonance dissipation is accomplished without vibrations from underground of the device. This function is necessary for higher bass precision and for an open and clearly distinguishable sound profileTry out the Lyd Absorbers with damping rings to the device as well as from the installation surface.
Information for one absorber:
Dimensions:
42 mm high
64 mm diameter
with M8 thread
Load capacity:
100 kg per absorber
Related products
Custom Design Milan Reference 10 Hi-Fi 4
All of the Milan Reference 10 Hi-Fi 4 Support Furniture Range are manufactured from solid hardwoods including Oak, Walnut and Ash. All of these hardwoods are harvested from professionally managed, sustainable forests where more trees were planted than harvested in the last 30 years. Please visit our Colour swatch page for more information on the finishes available.
Custom Design Discrete Hi-Fi 2
The Discrete Inert HiFi Support Range are unique to Custom Design, manufactured from exclusive, hand made and hand finished 5mm Acoustic Aluminium shelves Part of our philosophy to question and challenge all ideas. The Acoustic Aluminium and Acoustic Steel are the pioneering, engineering approach that Custom Design has taken to absorbing unwanted resonance, maximising isolation through resonance noise vibration absorption and sound performance, a serious improvement to the usual option of hifi support stand design.
The system works on the principle of constrained layer dampening, which is two sheets of the same material, found to be the most efficient, bonded together with the patented polymer.
Standard Finishes: Chrome / Brushed Chrome / Gold / Black
H x W x D 410mm x 525mm x 400mm
Shelf spacing 175mm – Other spacings available 100mm, 125mm, 200mm, 225mm or 250mm on request.
Support finishes available: Black, Mercury, Chrome, Brushed Chrome or Gold finish.
LINN K40 Speaker Cable (m)
For bi-wire applications where a compact cable is required, K40 offers a high performance and elegant solution.
Supplied as standard with every Kiko system, this cable is also available to buy by the metre and features two 2 sq mm stranded copper cores designed to maximise bass performance, alongside two 1.2 mm solid conductors for the treble.
- 4-core loudspeaker cable for bi-wire applications
- 2 cores of 2 sq mm stranded copper designed for low frequencies
- 2 solid core conductors designed for high frequencies
- Flexible sheath in pearlescent white or black finish
- Outer diameter 9 mm
- Available in custom lengths from Linn Specialists
LINN Urika internal phono stage
This unique moving coil phono stage fits snugly inside the Sondek LP12 turntable and works with the Linn Radikal motor control to deliver a new benchmark in LP12 performance.
OCTAVE Black Box
OCTAVE Black Box OCTAVE, with the Black Box technology, offers an instrument to optimizing the OCTAVE amplifier in respect to the speaker. This flexibility is a unique feature of the OCTAVE brand. The dynamic and tonal stability of an amplifier is strongly dependent upon the stability and capacity of the power supply, therefore the Black Box and Super Black Box were developed as external upgrades to the OCTAVE amplifiers’ power supply storage capacitors by increasing their capacitance by a factor of 4 (Black Box) or 10 (Super Black Box), respectively. This is a tremendous benefit if the speaker is difficult to drive. Loudspeaker efficiency is made less critical, while the amplifier is enabled to handle speakers with minimum impedances as low as 2 Ohms.
Concept 20 Stands
Concept Series Speaker Stands
Key Features
- These wonderfully finished speaker stands complement both the beauty and the ultimate sonic performance of the Concept 20 loudspeakers
- The stands are designed for music devotees who demand the very best quality from their loudspeakers. They incorporate the same Gelcore construction cabinet system found in the Concept 20 loudspeaker in an aesthetically pleasing and resonance-free floor stand.
Specifications:
- Dimensions H/D/W mm: 655 x 240 x 386
- Weight: 12kg
LINN K200 Speaker Cable (m)
High performance 2-core
Linn’s highest quality speaker cable, K200 uses a twisted pair of 60-strand (4 sq mm) copper core, offering superior shielding and audio performance over K20.
Enclosed in a flexible sheath, K200 is easy to manipulate for neat installation and compact enough to be used in multiple cable runs where multi-wiring is required.
- 2-core loudspeaker cable
- Each core contains 60 strands of copper (4 sq mm)
- Flexible sheath in silver finish
- Outer diameter 8 mm
- Available in custom lengths from Linn Specialists
Custom Design Milan 6 HiFi 4
The Milan 6 HiFi Furniture Support Range are manufactured from only FSC sourced solid hardwoods including real Oak, real Walnut and real Ash. Each piece of real, solid hardwood we supply has been hand selected and colour tone matched to the best of our ability, please visit our colour swatch page to view the finishes available. All of our real, solid hardwoods are sourced from only FSC fully licenced, professionally managed forests and thanks to techniques of sustained yield forest management more hardwoods have been grown in the last 30 years than have been harvested.
Standard Dimensions – 585mm (H) x 570mm (W) x 400mm (D)