Line Magnetic
LINE MAGNETIC LM-512CA
LINE MAGNETIC LM-512CA
LM-512CA – Preamplifier – With 6KZ8, 6922 & RCA 22DE4
The LM-512CA received in March 2017 a Red Dot Award, a German award recognized as the Oscar of International Industrial Design.
The integrated preamplifier LM-512CA operates with 3 pairs of tubes. A large volume potentiometer sits in the centre of the front panel allowing independent adjustment of each of the two channels.
It has a balanced XLR, 3 RCA inputs and also RCA and XLR outputs.
The Balance phase selection allows choosing the selection between American phase and British phase input Mode.
The use of high-quality components (Multicap, BC Axial, Philips, Panasonic Relay) wired in the air, for the most part, is the guarantee of exemplary reliability.
Its transformers output are of EI type, specially designed for power supply.
Finish: Silver
€9,500.00Add to cart
LINE MAGNETIC LM-513PA
LINE MAGNETIC LM-513PA
LM-513PA – Mono Amplifier – Push Pull 845 – 1x160W (Price for a pair)
The mono amplifier LM-513PA is a Push-Pull amplifier with 4x 845 tubes in pure Class A amplification and delivers 1x160W. The use of high-quality components (Multicap, Philips BC filter, Motorola) hand-made construction with the finest point-to-point wiring for the most part is the guarantee of exemplary reliability.
€28,000.00Add to cart
LINE MAGNETIC LM-69
LINE MAGNETIC LM-69
Speakers (Pair) – Full range 6 x 9inch – 2x20W – 8Ω – 95dB/W/1m – 40Hz-22kHz
The LM-69 (6 inch x 9 inch) loudspeakers use a loudspeaker developed by Line Magnetic but inspired by the creations of the 50s and 60s. Its double membrane (bi-conical) is made of cellulose pulp and has rigidity and lightness qualities that allow it to achieve an exceptional performance of 95dB into 8 Ohms.
Finish: Cherry
€4,490.00Add to cart
LINE MAGNETIC LM-805IA
LINE MAGNETIC LM-805IA
LM-805IA – Integrated Amplifier – Single Ended 805 – 2x48W
The Line Magnetic 805iA uses single-ended triode 805 tubes and operate in pure Class A. It delivers 2x48W power. It has 3 unbalanced line inputs, 1 bypass input and 4, 8, 16Ω output groups. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
The use of high-quality components (Mundorf N-Cap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 805 offers a listening to an unusual musicality.
€5,600.00Add to cart
LINE MAGNETIC LM-812 Iconic
LINE MAGNETIC LM-812 Iconic
LM-812 Iconic Speakers (Pair) – 18 inch woofer & LM-iconic 812 – 2x40W – 8Ω – 102dB/W/1m – 30Hz-20kHz
Following the renowned Altec Lansing Iconic design, this 2-way speakers system provides exceptional sound quality. The bass speaker with a diameter of 46 cm makes it possible to reproduce the low frequencies of an exceptional transparency.
Inspired by the famous JENSEN222 coaxial speaker, this monitor delivers unparalleled musicality and an extremely faithful stereo image. The use of the coaxial (with a 6-cell horn) greatly facilitates the positioning of the speakers in the listening room, knowing that the listening distance can be relatively low (about 2m50).
The use of the coaxial driver (with a 6-cell horn) greatly facilitates the positioning of the speakers in the listening room, knowing that the listening distance can be relatively small (about 2m50). Finally, the outstanding performance of 102dB under 8 Ohms makes them totally compatible with all kinds of amplification.
€14,570.00Add to cart
LINE MAGNETIC LM-845 Premium
LINE MAGNETIC LM-845 Premium
LM-845 Premium – Integrated Amplifier – Single Ended 845 – 2x30W
The LM-845 Premium is the result of many years of research on the 845 triodes Single Ended design. Thanks to its exceptional design and manufacturing quality, it is fast becoming the absolute reference in the high-end amplifiers world. With a power output of 2x30W, it can be used with most of the existing reference speakers.
The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is Outputs unit. In the amplifier unit the main amplifier and power supply parts are included while in the outputs unit output transformer and speaker outputs parts are included.
Amplifier unit and outputs unit are connected with two separate well-built connectors and cables for which you can put up and down or left and right.
All tube Integrated with 12AX7 input tubes, 310A signal amplification stage, 300B driver tubes and 845 output tubes. Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Line Magnetic 310A, Shuguang 300B and Shuguang 845.
Two user bias controls for 300B and 845 have been used for bias adjustment and two meters has been added to the front plate to allow you to monitor bias with ease.
Negative Feedback switch is on the front plate that you can choose between two levels of NFB to enjoy the different sound outputs.
In LM-845 Premium it includes eight transformers. Two pieces of power transformers, two output transformers, two coupling driver transformers, two chokes. In order to have a stable and better power supply, we have designed two pieces of specially designed Toroid power transformers in Balance. EI type of output transformers is installed in the outputs unit separately to lower interfere from the external radio frequency.
€11,200.00Add to cart
LINE MAGNETIC LM-845IA
LINE MAGNETIC LM-845IA
LM-845IA – Integrated Amplifier – Single Ended 845 – 2x22W
The LM-845 is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel, Single Ended design, Pure Class A Integrated Stereo Amplifier with 845 output power tubes. The drivers are 6P3P tubes, the capacitors are Multicap, American MIT Coupling Capacitors, German MCAP Coupling Capacitors,
All tube Integrated with 12AX7 input tubes for voltage amplification, EL34 driver tubes, 5AR4 rectifier tubes and 845 output tubes. Driver tubes 6P3P can also be replaced by different kinds of driver tubes and you can select which tubes you prefer judging by different sounds. Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-845IA as a power amplifier.
User bias control has been used for bias adjustment and one meter has been added to the front plate to allow you to monitor bias with ease. External Hum Balance adjustment for sound adjustment.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
€4,990.00Add to cart
LINE MAGNETIC LM-88IA
LINE MAGNETIC LM-88IA
LM-88IA – Integrated Amplifier – Push Pull KT88 – 2x42W
Forty-two watts per channel, Class AB Integrated Stereo Amplifier with KT88 output power tubes, 6CL8A and 12BH7 input tubes. Tubes we selected for the amplifier is Electro Harmonix 12BH7, Mullard 6CL8A and JJ Electronics KT88.
Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
LM-88IA Amplifier can operate in two different ways Auto-biased or Fixed Bias. You can select the one you prefer. Power output for Auto-bias mode is 45 watts while for fixed bias it is 30 watts per channel. Once worked in Auto-bias mode it outputs a more warmth sound and go near to the way of Class A operation.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-88IA as a power amplifier.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Audio Grade of components for LM-88IA: Japanese ALPS volume potentiometer, Multicap coupling Capacitors, American MIT Coupling Capacitors, German MCAP Coupling Capacitors, etc.
Finish: Black
€3,360.00Add to cart
LINE MAGNETIC LM-MINI84IA
LINE MAGNETIC LM-MINI84IA
LM-MINI84IA – Headphone Amplifier – Single Ended EL84 – 2x3W
Overview:
The LM-mini84IA is a real integrated amplifier using a single-ended output stage using EL84 tubes in class A mode. The output power of 2x3W perfectly matches with all audiophile headphones. This powerful capability allows the LM-mini84IA to drive qualitative hi-fi speakers. AA selector located on the front panel allows the user to choose between headphone or speaker output modes.
Highlights
– Compact
– Point-to-point wiring
Finish: Black
€900.00Add to cart