ATC CA2
ATC CA2
€1,995.00
CA2 – Stereo Pre-Amplifier
- Hand built in the UK.
- Ultra-low noise discrete design.
- 5 line inputs via RCA/phono.
- XLR and RCA/phono main outputs.
- Additional Sub, Tape and Headphone outputs.
- 1 x RIAA phono input via RCA (MM/MC configurable)
- 6-year warranty
“…if you want to hear the important musical detail presented in a coherent, clear-cut fashion this pairing has remarkably little competition in the two box arena. There are a few integrated amps which give them a run for their money in one respect or another but nothing comes to mind which seems like a better overall package.” Jason Kennedy Hi Fi+ No75.
Description
Highlights
Input Sensitivity: 300mV (line inputs 1V Out)
Input Impedance: 12k ohms
Frequency Response: DC – >200kHz
THD+N: >110dB
Dimensions (HxWxD): 90x445x330mm
Weight: 7kg / 15.4lbs
Related products
Pathos Logos
Pathos Logos: Integrated amplifier (HiDac Optional)
Close to the spirit that has animated since its origin has always been involved in the search for new solutions and improvement of its machines for Music.
E with this approach that Pathos after more than ten years after the introduction of the integrated Pathos Logos presents its evolution MKII.
Pathos is not usual to introduce updated versions of its models except in the presence of substantial and meaningful new ideas to offer its loyal customers and in general to all lovers of good music.
Indeed behind the usual original design the new Logos MKII hide the introduction of a series of new solutions some thought in order to further enhance the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele pretends that is also present in a high-end device.
Finish: Padouk Wood or Black Front Panel
LINE MAGNETIC LM-211IA
LM-211IA- Integrated Amplifier – Push Pull EL34 – 2x32W
The Line Magnetic integrated amplifier LM-211IA is a push-pull amplifier with 4x EL34 tubes in Class AB amplification and delivers 2x15W in triode mode and 2x32W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups.
The rear-illuminated front panel meter is used to adjust polarization of the tubes. The use of high-quality components (Realcap capacitors, ALPS potentiometer) wired in the air, for the most part, is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply. The LM-211IA delivers dynamic, rich and natural sound.
LINE MAGNETIC LM-150IA
LM-150IA- Integrated Amplifier – Push Pull KT120 – 2x100W
Overview:
One hundred watts per channel, Class AB Integrated Stereo Amplifier with KT150 output power tubes, 12AX7, 12AU7 and 6SN7 input tubes. 12AX7, 12AU7 and 6SN7 are for three stages of signal amplification while KT150 for the power amplification.
Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier.
User bias control has been used for bias adjustment including 2 vu-meters.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc Audio grade of components have been applied.
Hegel H30
The massive H30 mono power amplifiers from Hegel play any loudspeaker in the world with ease and authority. The H30 is our best power amplifier ever, and is definitely a combatant for being the best power amplifier in the world. The H30 is developed as a mono block, but there is also the possibility to use it as a stereo power amplifier to start with if you are on a budget. Progress is a one way street and so for our power amplifiers. The H30 is using a new and improved version of the patented Hegel SoundEngine amplifier technology. This further reduce all types of distortion. In addition to the improve SoundEngine we are also using the highest possible level of the Hegel FET-technology in the input stage and the voltage gain stage.
Pathos Ampli D
Pathos Ampli D – Power Stereo Amplifier
AmpliD is the first of a new line of digital amplifiers from Pathos. Completely balanced in D Class, it features a 70 Watt output power on each channel at 8 Ohm, and 130 Watt on each channel at 4 Ohm; it has 2 kinds of inputs (1 as stereo balanced XLR and 1 as stereo unbalanced RCA line).
Despite small dimensions, AmpliD provides great power and high sound quality. It reached state-of-the-art among all those digital amplifiers, that cannot be underestimated in terms of technological innovation.
Finishes: Grey or Black with buttons
Pathos Cinema X
Pathos Cinema X – 5+1 Integrated Amplifier
There is a section of the audiophile community who is gradually turning towards home cinema and five-channel sound.
However, this move often includes several compromises on the stereo sound or requires even two different systems. With their new integrated amplifier, Pathos dares to prove that it is possible to integrate high-performance stereo and surround sound in one product.
Music lovers now have the possibility of watching movies using one only amplifier without sonic compromise.
Equally, those buying the Cinema-X just for listening to music will not be disappointed either!
Pathos Inpol 2
Pathos Inpol 2 – Integrated Amplifier
Is the latest creation from Pathos, so-called because in the design Pathos presents the 2nd generation of their proprietary INPOL® technology.
It is also a completely balanced dual-mono configuration – easily recognized by the styling.
INPOL®, which carries a worldwide patent and gave birth to the multi-award winning products TT and InPower, has undergone advanced evolution.
The INPOL2 is a unique amplifier in many aspects and its sound quality will simply astound.
InPol (Inseguitore Pompa Linear – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid-state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way, the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor and further improved by the double InPol.
Finishes: Padouk Wood or Black Front Panel
Pathos Inpol Remix MKII
Pathos Inpol Remix MKII – Integrated Amplifier
InPolRemix MkII is a fully-balanced pure Class A integrated amplifier using the latest generation double-InPol circuitry.
The digital bias/gain set technology with intelligent control is entrusted to the same microprocessor which regulates the volume, thus guaranteeing the performance of the amplifier itself and its ability to drive the loudspeakers efficiently.
Thanks to the (optional) HiDac Mk2 converter, music lovers who want the best from the latest digital sources will find their demands fully met.
InPol (Inseguitore Pompa Lineare – Linear Pump Follower) is a system patented by Pathos Acoustics which has enjoyed great success and won many awards.
Inpol devices have a special sonic personality obtainable only by means of this particular circuit design – fully balanced in Class A using a single solid state component in follower configuration, with high current gain and with voltage gain together. The valve amplifier amplifies the input signal voltage and InPol supplies the current to drive the loudspeakers without any further amplification. In this way the signal is entrusted to the valves and becomes a true copy of the original, with all the quality, purity and harmonic content of the original.
This technology allows an increase in the theoretical output in pure Class A of between 25% and 50% together with a low output impedance which is fundamental for the damping factor, and further improved by the double InPol.
Finishes: Mat Metallic Black €4,200, Lacquered White, Red and Black €4,570