McIntosh MC207
€13,499.00
7-Channel Solid State Amplifier
- 200 Watts x 7 Channels
- Designed for home theaters
- Balanced and unbalanced inputs
Similar to the MC205, the MC207 7-channel home theater amplifier produces an amazing movie experience in your home by delivering 200 Watts of power to each speaker channel found in 7.1 home theater systems. It can also be used in 5.1 home theaters with the remaining 2 channels used to power a second zone in stereo. Our exclusive Dynamic Power Manager® (DPM) technology enables the MC207 to deliver its full power into both 4 and 8 Ohm speakers – making it compatible with a wide variety of home theater speakers.
Description
As with the MC205, the MC207 does not need cooling fans so there is no fan noise to interfere with your movie’s soundtrack. It features Power Guard® to prevent potential speaker damage caused by clipping and over-driving of the amplifier. Short-circuit protection is provided by our Sentry Monitor™ technology that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal. To connect the MC207 to yourhome theater processor, inputs for both balanced and unbalanced cables are included. Three blue watt meters provide an instant measurement of power output of the front three channels (the meters may be switched off if they conflict with the television or movie screen).
The classic black glass front panel, polished stainless steel chassis, knobs and custom machined brushed aluminum end caps make the MC207 an eye pleasing addition to any room.
ELECTRONIC SPECIFICATIONS
-
- Power Output per Channel
- 200W @ 4 or 8 Ohms
-
- Number of Channels
- 7
(can also be used as a 2-zone amplifier with 5 channels in zone A and 2 channels in zone B)
-
- Total Harmonic Distortion
- 0.005%
-
- S/N below rated output
- 112dB
-
- Dynamic Headroom
- 1.7dB
-
- Damping Factor
- >60 @ 4 Ohms
>140 @ 8 Ohms
-
- Rated Power Band
- 20Hz to 20kHz
-
- Frequency Response
- +0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
CONTROL
-
- Remote Power Control
- Yes, 7 or 5 + 2 Channel
-
- Multi-Channel DB25 Cable
- Yes
GENERAL SPECIFICATIONS
-
- Circuit Configuration
- Push-Pull Complementary
-
- Circuit Design
- Solid State
-
- Mono Bridge
- No
-
- Mono Parallel
- No
-
- Output Type
- Direct Coupled with Dynamic Power Manager®
-
- Meters
- Yes
-
- Meter Light Switch
- Yes
-
- Balanced Input
- 7
-
- Front Panel
- Glass
-
- Illumination
- LED Fiber Optic
-
- Chassis Style
- Inverted
CONNECTIVITY
-
- Speaker Binding Post Type
- Yes
WEIGHTS & DIMENSIONS
-
- Dimensions (W x H x D)
- 17-1/2″ (44.5cm) x 9-7/16″ (23.9cm) (including feet) x 21″ (53.3cm) (including front panel and cables)
-
- Weight
- 83 lbs (37.6 kg)
-
- Shipping Weight
- 116 lbs (52.6 kg)
Related products
Hegel H30
The massive H30 mono power amplifiers from Hegel play any loudspeaker in the world with ease and authority. The H30 is our best power amplifier ever, and is definitely a combatant for being the best power amplifier in the world. The H30 is developed as a mono block, but there is also the possibility to use it as a stereo power amplifier to start with if you are on a budget. Progress is a one way street and so for our power amplifiers. The H30 is using a new and improved version of the patented Hegel SoundEngine amplifier technology. This further reduce all types of distortion. In addition to the improve SoundEngine we are also using the highest possible level of the Hegel FET-technology in the input stage and the voltage gain stage.
LINE MAGNETIC LM-845IA
LM-845IA – Integrated Amplifier – Single Ended 845 – 2x22W
The LM-845 is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel, Single Ended design, Pure Class A Integrated Stereo Amplifier with 845 output power tubes. The drivers are 6P3P tubes, the capacitors are Multicap, American MIT Coupling Capacitors, German MCAP Coupling Capacitors,
All tube Integrated with 12AX7 input tubes for voltage amplification, EL34 driver tubes, 5AR4 rectifier tubes and 845 output tubes. Driver tubes 6P3P can also be replaced by different kinds of driver tubes and you can select which tubes you prefer judging by different sounds. Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-845IA as a power amplifier.
User bias control has been used for bias adjustment and one meter has been added to the front plate to allow you to monitor bias with ease. External Hum Balance adjustment for sound adjustment.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
LINE MAGNETIC LM-845 Premium
LM-845 Premium – Integrated Amplifier – Single Ended 845 – 2x30W
The LM-845 Premium is the result of many years of research on the 845 triodes Single Ended design. Thanks to its exceptional design and manufacturing quality, it is fast becoming the absolute reference in the high-end amplifiers world. With a power output of 2x30W, it can be used with most of the existing reference speakers.
The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is Outputs unit. In the amplifier unit the main amplifier and power supply parts are included while in the outputs unit output transformer and speaker outputs parts are included.
Amplifier unit and outputs unit are connected with two separate well-built connectors and cables for which you can put up and down or left and right.
All tube Integrated with 12AX7 input tubes, 310A signal amplification stage, 300B driver tubes and 845 output tubes. Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Line Magnetic 310A, Shuguang 300B and Shuguang 845.
Two user bias controls for 300B and 845 have been used for bias adjustment and two meters has been added to the front plate to allow you to monitor bias with ease.
Negative Feedback switch is on the front plate that you can choose between two levels of NFB to enjoy the different sound outputs.
In LM-845 Premium it includes eight transformers. Two pieces of power transformers, two output transformers, two coupling driver transformers, two chokes. In order to have a stable and better power supply, we have designed two pieces of specially designed Toroid power transformers in Balance. EI type of output transformers is installed in the outputs unit separately to lower interfere from the external radio frequency.
LINE MAGNETIC LM-513PA
LM-513PA – Mono Amplifier – Push Pull 845 – 1x160W (Price for a pair)
The mono amplifier LM-513PA is a Push-Pull amplifier with 4x 845 tubes in pure Class A amplification and delivers 1x160W. The use of high-quality components (Multicap, Philips BC filter, Motorola) hand-made construction with the finest point-to-point wiring for the most part is the guarantee of exemplary reliability.
Pathos Inpower
Pathos Inpower – Monoblock Power Amplifier
InPower monoblock power amplifiers represent the evolution of the INPOL® circuit, originally created with the birth of the T.T. integrated amplifier.
The purpose of InPower project was to design an amplifier able to drive all loudspeakers.
Even in spacious listening environments. All this with the same state-of-the-art sound quality which has been universally bestowed upon the T.T.
Pathos Cinema X
Pathos Cinema X – 5+1 Integrated Amplifier
There is a section of the audiophile community who is gradually turning towards home cinema and five-channel sound.
However, this move often includes several compromises on the stereo sound or requires even two different systems. With their new integrated amplifier, Pathos dares to prove that it is possible to integrate high-performance stereo and surround sound in one product.
Music lovers now have the possibility of watching movies using one only amplifier without sonic compromise.
Equally, those buying the Cinema-X just for listening to music will not be disappointed either!
LINE MAGNETIC LM-805IA
LM-805IA – Integrated Amplifier – Single Ended 805 – 2x48W
The Line Magnetic 805iA uses single-ended triode 805 tubes and operate in pure Class A. It delivers 2x48W power. It has 3 unbalanced line inputs, 1 bypass input and 4, 8, 16Ω output groups. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
The use of high-quality components (Mundorf N-Cap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 805 offers a listening to an unusual musicality.
Pathos Classic Remix
Pathos Classic Remix – Integrated amplifier
Beauty as a unifying element, the universal language beyond of culture, age, nationality, a noble force able to remove the barriers and put in contact with humanity.
Beauty of sound, beauty of craftsmanship, beauty of technology, the beauty of the novelty, beauty of style and design, beauty as an ambassador of a confirmation for those already familiar with the Pathos, or ambassador of the Pathos values for all others that who will find in a new and perfect balance of lines, materials, and technologies, all iconic elements tradition Pathos albeit in a more contemporary formula revisited, in a word: ClassicRemix!
Finishes: Matt Metalic black – €2600, Lacquered white, black, red and zebrawood – €2970